Product Specification:
Wilson Cellular Introduces A New Cellular SIGNALBOOST
Mobile and Home/Office Dual-Band Cellular/PCS Amplifier
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies 800MHz AMPS, TDMA, CDMA and GSM signals and passes through 1900MHz PCS signals providing up to 3 Watts of output power on the 800MHz band. Increases your cellular signal 10 to 15 times with up to 3 Watts of Power). Works with all 800MHz and 1900MHz Cellular Service Providers except iDEN (Nextel/Southern LINC/Mike).
Wilson SIGNALBOOST Features:
• Works with all Cellular/PCS cell phones and laptop data cards (except iDEN, Nextel)
• Greatly reduces disconnects and dropouts
• Has up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone or laptop data card
• Works Great on Trucks, Cars, RVs, Boats, Homes, Offices, or Almost Any Other Application
• Extends cell phone battery life
• Easty to install and use and it's portable
Specifications
|
Part Number |
|
811210 |
|
Frequency |
|
824-894 MHz / 1850-1990 MHz |
|
Gain |
|
Cell Site Controlled |
|
Max Output Power |
|
up to 3 watts (Cell Site Controlled) |
|
Max RF |
|
+35 dBm / +33 dBm |
|
Noise Figure |
|
3.5 dB nominal |
|
Flatness |
|
±2 dB / ±2 dB |
|
Isolation |
|
> 50 dB |
|
Power Requirements |
|
12V, 2A |
|
Connectors |
|
FME-Male 50 ohms |
|
Dimensions |
|
5 x 3.5 x 1.2 (inches) or 12.7 x 8.9 x 3 (cm) |
|
Weight |
|
1.03 lbs or 0.468 kg |
